Beck Arnley 103-2683 Steering Rack Boot Kit

  • Matches OE form, fit, and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific to ensure a correct fit for your vehicle

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.


Write Review
Jeff R.
August 4, 2015
Fit perfectly on an 85' MR2 (AW11). It goes on much easier than the driver's side boot. I recommend putting the boot on over the inner tie rod, putting a bit of lubricant on the end of the boot, and then turning the steering wheel all the way to the right. This will compress the boot and push it onto the steering rack lip that it needs to sit on.

The zip ties that come with the boot will not make the usual click sound as you tighten them, and there is no way to loosen them. I recommend waiting until you have the boot fully on before putting the zip tie on and tightening it.
August 10, 2015
Completed my front suspension repair perfectly.
May 17, 2011
This item worked great on my '88 Toyota MR2. Good quality, fit as well as the factory part, and came with everything needed to install. Recommended!
April 12, 2013
worked great for 1988 toyota mr2 rack (pass side)I would recommended this product if you're looking to rebuild your rack or replace torn boot.
August 5, 2014

Recommend Products