SMALL IN SIZE BUT BIG ON POWER WATTS BLASTING LIGHT, the B4L4PAC HIGH POWER LED Beacon provides a full 360 degrees of visibility with 4 integrated wide angle LED's and a specially designed Fresnel lens. Designed to be permanently mounted, this unit includes the necessary mounting hardware to help make installation simple and fast. Provides a full 360 degrees of signal visibility and is designed to provide an effective strobe solution or simulated revolving for applications requiring a small but very powerful signal light. Incorporating 4 wide angle 3 watts high powers LED's into a slim base and Fresnel lens, the strobing flash effect from this unit is effectively distributed over the entire diameter of the unit, producing a strobing flash effect that is both powerful and efficiently radiated. The waterproof lamp housing on this unit is constructed of polycarbonate and Nylon and the internal electronics are fully protected for superior moisture and vibration resistance. The lens is impact and shock resistant, resulting in a unit that is highly durable and able to withstand the rigors of commercial and industrial applications. This LED light produces a single, double, continues or simulated revolving flash pattern that is easily visible at extended distances and provides an effective signal for applications including security, military, utility or marine operations. This unit can operate on voltages ranging from 85 to 65V AC. 4 Flash Patterns available by selectable jumper: - Simulated Revolving - Single Flash (STROBE Effect) - Double Flash STROBE Effect) - Continuous Flash Mounting hardware and foam bottom basket are included. 5 /4" high with screw down lens, sealed with silicone gasket. Conforms to CSA C. and ANSI/UL requirements.